Login

Please login with your faculty domain account:

Acount Information

Staff/Student ID no.: *

Password: *

Forget Password?

For Non-BMS User

Staff/Student ID no.:

Password:

non BMS-User Login

Announcement

Friday The coming BMS safety training will be conducted on 12 April 2024 (Fri.) at 10:30 in B2301. Pls. spare your time to attend or you may be restricted from using the laboratory.
 
Friday The coming autoclave and cold room training will be conducted on 12 April 2024 (Fri.) at 5pm in Yellow zone corridor near cold room! No registration is required and you have to join before you can access the lab. and use the autoclave and cold room!!

To Zeiss LSM 880 confocal users: the EX Argon-Multiline laser in the system has been replaced and is now functioning properly.

The coming BMS safety training will be conducted on 12 April 2024 (Fri.) at 10:30 in B2301. Pls. spare your time to attend or you may be restricted from using the laboratory.
 
The coming autoclave and cold room training will be conducted on 12 April 2024 (Fri.) at 5pm in Yellow zone corridor near cold room! No registration is required and you have to join before you can access the lab. and use the autoclave and cold room!!

To Azure Gel Doc system users: The system  has been upgrade to 400 with RGB detection, including LEDs for excitation at 524 nm, 628 nm - Emission filters at 513 nm, 572 nm and 684 nm for detection of Cy3/Cy5/Cy2 dyes and equivalent.

To Nikon NiE users: DON'T SAVE YOUR DATA ON THE DESKTOP!! Please save in the research group folder on the D drive.

To Nikon microscope users: PLEASE DON'T use the support WhatsApp (94046982) for service inquiries

**Monthly equipment data clean-up will be arranged 9:00am on last working day, please back up your files if need.

---------------------------------------------------------------
To all Gel Doc users: Booking is required.

To all core users: You should sign the logbook after use. We will send you a warning letter if you failed to sign the logbook.

Freeze Dryer users: Booking is required, and please sign in the Log book after use.

Important requirements for use of the autoclave:
1) Write down the log book before use autoclave
2) Put autoclave tapes on the items before sterilization and check the autoclave tapes after sterilization
3) Check the autoclave status before open the door of the autoclave.
(e.g. Temperature, Pressure, Status lamp should be flash on Warm / Com.)
4) If other people using the autoclave, please Don't disturb the autoclave.
5)Make sure the cycle of autoclave is completed normally before you open the door or turn off the power

Thermo HM525NX Cryostat users: Please borrow the sample holders from  Baoshan Liao  of Dr. Xiong lab upon booking (No1.1) or from Qingqing Lu of Dr. Kim lab (N0.2).

Equipment Booking System

Login

Announcement

Training Time Table