Login

Please login with your faculty domain account:

Acount Information

Staff/Student ID no.:

Password:

Forget Password?

For Non-BMS User

Staff/Student ID no.:

Password:

non BMS-User Login

Announcement

To Thermo HM525NX Cryostat Users: The system is under maintenance from 8 May to 11 May.

The IVIS has been temporarily suspended for further checking.

The coming BMS safety training will be conducted on 7 May 2026 (Thu.) at 14:30am in B2301. Pls. spare your time to attend or you may be restricted from using the laboratory.

The coming autoclave and cold room training will be conducted on 7 May 2026 (Thu.) at 5pm in cold room. Pls. wait in the corridor of the cold room in yellow zone.

Important requirements for use of the autoclave:
1) Write down the log book before use autoclave
2) Put autoclave tapes on the items before sterilization and check the autoclave tapes after sterilization
3) Check the autoclave status before open the door of the autoclave(e.g., Temperature, Pressure, Status lamp should be flash on Warm / Com.)
5)Make sure the cycle of the autoclave is completed normally before you open the door or turn off the power
6) NO flammable, toxic, or hazardous chemicals, sharps/broken glass, or empty chemical/medium bottles to be autoclaved

To QS3 Real-Time PCR No.1 Users: The touchscreen on the QS3 machine is currently disabled. Please use a mouse to operate the system until the touchscreen is restored. Note: There is only one USB port on the instrument. To export data:
1.	Save your data to the system first.
2.	Disconnect the mouse.
3.	Plug in your USB drive and export the saved data.

2/1/2026: hypoxia chamber no. 1  is out order, please book No. 2 for your experiment.

To Nikon confocal users: The incubator has been installed and is fully operational. For any inquiries or assistance, please contact Shuyi at extension 2485 or via email at sy.mai@cityu.edu.hk.

To Cell Sorter Users: The new computer for the cell sorter is in use. Please contact kamcyeung8@cityu.edu.hk to set up the new account.

To ThermoFisher Microplate Reader users: Online booking is required. For application inquiries, please contact Shuyi at extension 2485 or via email at sy.mai@cityu.edu.hk.

To BioTek Synergy™ H1 Microplate Reader users: The machine is currently disabled and undergoing maintenance. Please use the Thermo Microplate Reader located in B2314 as a temporary alternative. For inquiries, please contact Shuyi at extension 2485 or via email at sy.mai@cityu.edu.hk.

To Cell Sorter users: A handbook for the cell sorter has been uploaded to this system. In addition, all new users must pass a quiz before gaining access to the cell sorter.

To Cell Sorter users: New process for obtaining the calibration beads is implemented. Users are required to come to G2438 to collect the beads for their experiments. Please contact Tyler for more information (kamcyeung8@cityu.edu.hk)

To Diagenode Bioruptor users: Online booking is required to facilitate the use of the Diagenode Bioruptor. Upon booking, users can borrow the adapters from Prof. Rebecca CHIN’s lab (YEUNG-Y2311, 34426770).

To Freeze Dryer Users: 1) Monthly maintenance will be arranged for 9:30 AM on the last working day of the month. Please adjust your experiment schedule accordingly. 2) Please ensure that all accessories (e.g., glass beakers, glass tubes) are returned after use.

To Nikon/ Zeiss confocal users: Please clean the immersion oils after using the immersion objective lens. Failure to do so will affect the equipment's performance. Users who do not clean the oils may have their access suspended.

To Azure Gel Doc system users: The system  has been upgrade to 400 with RGB detection, including LEDs for excitation at 524 nm, 628 nm - Emission filters at 513 nm, 572 nm and 684 nm for detection of Cy3/Cy5/Cy2 dyes and equivalent.

To Nikon NiE users: DON'T SAVE YOUR DATA ON THE DESKTOP!! Please save in the research group folder on the D drive.

To Nikon microscope users: PLEASE DON'T use the support WhatsApp (94046982) for service inquiries

**Monthly equipment data clean-up will be arranged 9:00am on last working day, please back up your files if need.

---------------------------------------------------------------
To all Gel Doc users: Booking is required.

To all core users: You should sign the logbook after use. We will send you a warning letter if you failed to sign the logbook.

Freeze Dryer users: Booking is required, and please sign in the Log book after use.

Important requirements for use of the autoclave:
1) Write down the log book before use autoclave
2) Put autoclave tapes on the items before sterilization and check the autoclave tapes after sterilization
3) Check the autoclave status before open the door of the autoclave.
(e.g. Temperature, Pressure, Status lamp should be flash on Warm / Com.)
4) If other people using the autoclave, please Don't disturb the autoclave.
5)Make sure the cycle of autoclave is completed normally before you open the door or turn off the power

Thermo HM525NX Cryostat users: Please borrow the sample holders from  Baoshan Liao  of Dr. Xiong lab upon booking (No1.1) or from Qingqing Lu of Dr. Kim lab (N0.2).

Equipment Booking System

Login

Announcement

Training Time Table